Search
Close this search box.

Introduction to film faced plywood

Film Faced Plywood is a plywood material with a waterproof surface coating that is widely used in construction, engineering and transportation. This article will introduce the production process of Film Faced Plywood and related precautions.

1. Choose high-quality boards:
The first step in making Film Faced Plywood is to choose a high-quality board, usually using plywood as the base material. Choose boards with high glue strength and durability, such as high-density plywood that uses less glue.

2. Selection of coating materials:
The surface of Film Faced Plywood needs to be coated with a waterproof coating to provide waterproofing and durability. Common coating materials include phenolic resin, putty and wear-resistant plastic film. Coating material selection should be based on specific application and budget considerations.

3. Preparing and Applying the Coating:
Before making Film Faced Plywood, the coating material needs to be prepared and applied. According to the requirements of the coating material, the substrate is first sanded and cleaned to provide a good bonding effect. Then, apply the waterproof coating evenly on the surface of the board, using a scraper or spray equipment to ensure the coating is even and fully covered.

4. Drying and curing:
After coating is completed, Film Faced Plywood needs to be dried and cured to ensure the stability and adhesion of the coating. Place the coated sheet in a drying room with good ventilation and suitable temperature to allow the coating to fully dry and solidify. Depending on the requirements of the coating material, specific times and temperatures may be required.

5. Cutting and trimming:
After drying and curing, Film Faced Plywood can be cut and trimmed to get the desired size and shape. Use appropriate cutting tools to precisely cut and trim boards to project needs, ensuring edges are flat and plumb.

6. Quality inspection:
After the production of Film Faced Plywood is completed, quality inspection is carried out to ensure that it complies with relevant standards and regulations. Check the adhesion of the coating, the uniformity of the coating and the dimensional accuracy of the board to ensure that the Film Faced Plywood produced is of good quality.

Making Film Faced Plywood requires selecting a high-quality base material, coating and drying and curing. Through correct production process and quality inspection, high-quality Film Faced Plywood can be obtained, which is widely used in various construction and engineering projects to provide reliable waterproof performance and durability.

Film Faced Plywood is a material commonly used in building construction and formwork work that is waterproof and durable. In order to ensure the correct use of Film Faced Plywood and ensure the quality of the project, the following are some usage precautions.

1. Storage and maintenance:
Film Faced Plywood must be properly stored and maintained before use. Store plywood vertically in a dry, ventilated place away from moisture and direct sunlight. At the same time, avoid long-term stacking to avoid deformation of the panels.

2. Protective measures:
Appropriate precautions must be taken to ensure safety when working with Film Faced Plywood. Use appropriate personal protective equipment such as engineering gloves and safety shoes to avoid direct contact with sharp objects and to prevent slipping or injury.

3. Correct handling and installation:
When handling Film Faced Plywood, avoid using too much or too little force to reduce the risk of damage. Use appropriate tools, try to carry it with more than two people, and ensure that the board is evenly stressed. During installation, the edges of the plywood must be smooth, vertical and horizontal to ensure the firmness and stability of the building structure.

4. Avoid drastic temperature changes:
Film Faced Plywood is sensitive to severe temperature changes, so try to avoid exposing the plywood to extreme temperatures during use. Excessive temperature may cause the plywood to expand or deform, affecting the use effect and construction quality.

5. Adapt to humidity environment:
Although Film Faced Plywood has a waterproof coating, you still need to pay attention to its use in environments with high humidity. In the case of high humidity at the construction site or in the surrounding environment, appropriate measures should be taken, such as covering with waterproof film or using cement slurry to waterproof the plywood.

6. Regular inspection and maintenance:
During the use of Film Faced Plywood, the condition of the board and the adhesion of the coating should be checked regularly. If coating damage, plate deformation or edge damage is found, repair or replacement should be carried out in time to ensure the normal use and construction quality of the plywood.

7. Correct disassembly and storage:
After completing a construction project, Film Faced Plywood should be properly disassembled and stored. Remove plywood carefully to avoid damage or scratches. Store plywood properly in a dry, ventilated place away from sunlight and moisture.

finger joint plywood
finger joint plywood

Following the above precautions will ensure proper use of Film Faced Plywood and ensure the quality of your project. Pay attention to storage, protection, transportation and installation to avoid the impact of temperature changes and humidity environments on the plywood, and perform regular inspections and maintenance to ensure the durability and stability of Film Faced Plywood.

plywood factory

Yachen china plywood manufacturer, has been focusing on plywood production for 10 years, providing you with one-stop indoor and outdoor decoration solutions.

Our team is always ready to advise or answer your questions. So please contact us today at whatsapp:86-19853927722 or email: info@yachenwood.com. Or you can come to China for a study tour.

Facebook
Pinterest
Twitter
LinkedIn
WhatsApp

Leave a Reply

Your email address will not be published. Required fields are marked *

eighteen − seventeen =

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@yachenwood.com”

Get a free quote

Thank you for your trust and recognition of Yachen Wood, our samples are free of charge, you only need to bear the courier cost